⚠️ Important Notice


Your IP address and browser information will be recorded as proof of this acknowledgement. This data is retained for 12 months.

🟢 SOLVED: Audi A3 2018 ABS warning light on — Audi A3 2018 | MyCarFault
🟢 SOLVED 80% 1 fix reported · 73 driver confirmations

🟢 Audi A3 2018 ABS warning light on

Audi A3 2018
On This Page: 🔍 Symptoms ⚙️ Causes 🔧 All Repairs ⚠️ Avoid These 🧾 Driver Reports 🔗 Similar Faults 🩺 Related Symptoms 📖 Repair Guides
⚡ Quick Summary
Severity Level
Medium
Safe to Drive?
⚠️ Drive with Caution
Safety Impact
Indirect risk — worth monitoring, not urgent
Urgency Level
🟡 Monitor Closely

Audi A3 2018 ABS warning light illuminated. ABS system may not function in emergency braking. No other issues. 167379 km. This fault code is stored when the engine control unit detects a specific fault condition. Common causes include sensor failures, wiring faults, and component wear. Always read additional fault codes before replacing parts — multiple codes together provide a clearer diagnosis. Clear the code after repair and test drive to confirm the fault does not return.

🔍 Symptoms

📍 ABS warning light on 📍 Audi A3

⚙️ Possible Causes

ABS warning light on Audi A3 Possible: Read ABS code: right rear wheel speed sensor fault. Cleaned sensor tip and tone ring with wire brush — corrosion buildup causing false fault. Light went off after cleaning. No sensor replacement needed.

Repair / Solution

Based on 73 driver confirmations

Read ABS code: right rear wheel speed sensor fault. Cleaned sensor tip and tone ring with wire brush — corrosion buildup causing false fault. Light went off after cleaning. No sensor replacement needed. 0%
0 worked · 0 did not · ⚪ Unverified

⚠️ Wrong Diagnosis?

No commonly reported misdiagnoses for this fault yet. If you have replaced a part that did not fix this Audi A3 2018 problem, submit a wrong diagnosis report — it helps other drivers avoid the same costly mistake.

🧾 Driver Reports

✅ Fixed Read ABS code: right rear wheel speed sensor fault. Cleaned sensor tip and tone ring with wire brush — corrosion buildup causing false fault. Light went off after cleaning. No sensor replacement needed.
Was this helpful? 0 votes

🚗 More About This Vehicle

📋 All Audi A3 fault reports → 🚘 All Audi fault reports → 🔧 Browse all fault reports →
Explore more Audi models
Audi A4 53 Audi A6 47 Audi Q5 32 Audi Q7 30

📖 Related Repair Guides

Help other owners by sharing your experience.

Your real-world fix helps thousands of drivers worldwide. Takes 2 minutes.

🔧
Usta
● Online