✅ Fixed
Read ABS code: right rear wheel speed sensor fault. Cleaned sensor tip and tone ring with wire brush — corrosion buildup causing false fault. Light went off after cleaning. No sensor replacement needed.
Subaru WRX 2014 ABS warning light on
Subaru
Impreza
2014
⚡ Quick Summary
Severity Level
Medium
Safe to Drive?
⚠️ Drive with Caution
Safety Impact
Indirect risk — worth monitoring, not urgent
Urgency Level
🟡 Monitor Closely
Subaru WRX 2014 ABS warning light illuminated. ABS system may not function in emergency braking. No other issues. 112366 km. This fault code is stored when the engine control unit detects a specific fault condition. Common causes include sensor failures, wiring faults, and component wear. Always read additional fault codes before replacing parts — multiple codes together provide a clearer diagnosis. Clear the code after repair and test drive to confirm the fault does not return.
🔍 Symptoms
📍 Subaru WRX
⚙️ Possible Causes
Subaru WRX
Possible: Read ABS code: right rear wheel speed sensor fault. Cleaned sensor tip and tone ring with wire brush — corrosion buildup causing false fault. Light went off after cleaning. No sensor replacement needed.
Repair / Solution
Based on 35 driver confirmations
⚠️ Wrong Diagnosis?
No commonly reported misdiagnoses for this fault yet. If you have replaced a part that did not fix this Subaru Impreza 2014 problem, submit a wrong diagnosis report — it helps other drivers avoid the same costly mistake.
🧾 Driver Reports
🚗 More About This Vehicle
Explore more Subaru models
Help other owners by sharing your experience.
Your real-world fix helps thousands of drivers worldwide. Takes 2 minutes.