⚠️ Important Notice

By accepting, you confirm you have read and agree to our Terms of Use and Privacy Policy.

Your IP address and browser information will be recorded as proof of this acknowledgement. This data is retained for 12 months.

🟢 SOLVED: P0700 Transmission Control System Malfunction — Reading TCM Codes | MyCarFault
🟢 SOLVED 80% 1 fix reported · 65 driver confirmations

🟢 P0700 Transmission Control System Malfunction — Reading TCM Codes

On This Page: 🔍 Symptoms ⚙️ Causes 🔧 All Repairs ⚠️ Avoid These 🧾 Driver Reports 🔗 Similar Faults
⚡ Quick Summary
Severity Level
Medium
Safe to Drive?
⚠️ Drive with Caution
Safety Impact
Indirect risk — worth monitoring, not urgent
Urgency Level
🟡 Monitor Closely

P0700 with transmission warning light. Car shifts rough or enters limp mode. This fault code is stored when the engine control unit detects a specific fault condition. Common causes include sensor failures, wiring faults, and component wear. Always read additional fault codes before replacing parts — multiple codes together provide a clearer diagnosis. Clear the code after repair and test drive to confirm the fault does not return.

🔍 Symptoms

📍 Multiple ⚠️ P0700 fault code

⚙️ Possible Causes

Fault code P0700 detected Multiple Possible: P0700 is a gateway code — means TCM stored its own fault codes. P0700 alone tells you nothing specific. Need a scanner that reads TRANSMISSION codes (not just engine codes). Cheap ELM327 Bluetooth adapters often miss transmission codes. Use Foxwell, Autel

Repair / Solution

Based on 65 driver confirmations

P0700 is a gateway code — means TCM stored its own fault codes. P0700 alone tells you nothing specific. Need a scanner that reads TRANSMISSION codes (not just engine codes). Cheap ELM327 Bluetooth adapters often miss transmission codes. Use Foxwell, Autel 0%
0 worked · 0 did not · ⚪ Unverified

⚠️ Wrong Diagnosis?

No commonly reported misdiagnoses for this fault yet. If you have replaced a part that did not fix this problem, submit a wrong diagnosis report — it helps other drivers avoid the same costly mistake.

🧾 Driver Reports

✅ Fixed P0700 is a gateway code — means TCM stored its own fault codes. P0700 alone tells you nothing specific. Need a scanner that reads TRANSMISSION codes (not just engine codes). Cheap ELM327 Bluetooth adapters often miss transmission codes. Use Foxwell, Autel

P0700 is a gateway code — means TCM stored its own fault codes. P0700 alone tells you nothing specific. Need a scanner that reads TRANSMISSION codes (not just engine codes). Cheap ELM327 Bluetooth adapters often miss transmission codes. Use Foxwell, Autel, or dealer scanner. Common TCM codes alongside P0700: P0730 wrong gear ratio, P0741 TCC solenoid, P0750-P0770 shift solenoids. Fix the specific code, not just P0700.

Was this helpful? 0 votes

Help other owners by sharing your experience.

Your real-world fix helps thousands of drivers worldwide. Takes 2 minutes.

✅ Submit a Fault ❌ Wrong Diagnosis?
🔧
Usta
● Online