⚠️ Important Notice

By accepting, you confirm you have read and agree to our Terms of Use and Privacy Policy.

Your IP address and browser information will be recorded as proof of this acknowledgement. This data is retained for 12 months.

P0011 Code — Meaning, Real Fixes & Costs | MyCarFault
P0011
🟡 Medium Engine system

P0011 — Intake Camshaft Timing Over-Advanced Bank 1

4 Driver reports
4 Solved cases
4 Verified fixes
0 Wrong repairs reported

📊 Diagnostic Overview

Severity, cost and difficulty for P0011, based on data already on this page.

Severity
🟡 Medium
Diagnostic Difficulty
Moderate
System
Engine
Common Causes (based on confirmed repairs)
  • Changed oil with VW-approved 5W-30 — was 2000 miles overdue. Cleared code. Rattle reduced 60%. Performed VVT solenoid cleaning. Rattle gone after 2 oil changes. 1 vehicle
  • Incorrect oil viscosity used during service — Ferrari requires 0W-40. Changed to Shell Helix Ultra ECT C3 0W-40 as specified. Cam timing codes cleared and did not return. 1 vehicle
  • Oil was 3000 miles overdue. Changed oil with fresh 5W-20 full synthetic. Cleared code and rattle. Code has not returned in 12000 miles. 1 vehicle
  • P0011 = VVT system not controlling cam timing properly. BEFORE replacing parts: 1) Change oil and filter with CORRECT weight oil — low oil pressure causes this on many engines. Use manufacturer specified viscosity. 2) Clean VVT solenoid screen (remove sol 1 vehicle

📐 Diagnostic Difficulty reflects how many different repairs drivers have tried for P0011 and how often those attempts turned out to be the wrong fix — it is calculated from MyCarFault's own reports, not an official manufacturer rating.

⭐ MOST VERIFIED FIX FOR P0011
Changed oil with VW-approved 5W-30 — was 2000 miles overdue. Cleared code. Rattle reduced 60%. Performed VVT solenoid cleaning. Rattle gone after 2 oil changes.
Reported in 1 approved case ·
⚪ Unverified

Top Reported Fixes for P0011

Ranked by confidence score — same vehicle matches weighted higher.

Changed oil with VW-approved 5W-30 — was 2000 miles overdue. Cleared code. Rattle reduced 60%. Performed VVT solenoid cleaning. Rattle gone after 2 oil changes. 1 case
No repair votes yet · ⚪ Unverified
Incorrect oil viscosity used during service — Ferrari requires 0W-40. Changed to Shell Helix Ultra ECT C3 0W-40 as specified. Cam timing codes cleared and did not return. 1 case
No repair votes yet · ⚪ Unverified
Oil was 3000 miles overdue. Changed oil with fresh 5W-20 full synthetic. Cleared code and rattle. Code has not returned in 12000 miles. 1 case
No repair votes yet · ⚪ Unverified
P0011 = VVT system not controlling cam timing properly. BEFORE replacing parts: 1) Change oil and filter with CORRECT weight oil — low oil pressure causes this on many engines. Use manufacturer specified viscosity. 2) Clean VVT solenoid screen (remove sol 1 case
No repair votes yet · ⚪ Unverified

Driver Reports — P0011 4 reports

🟢 SOLVED 80% P0011 Intake Camshaft Timing Over-Advanced Bank 1 — VVT Issues
👁 1,381
🟢 SOLVED 80% VW Passat 2016 1.8 TSI timing chain noise
Volkswagen Passat 2016 👁 1,078
🟢 SOLVED 80% Kia Sportage 2017 P0011 and engine rattle
Kia Sportage 2017 👁 1,066
🟢 SOLVED 80% Ferrari 488 2017 GTB cam timing codes after oil service
2017 👁 870

Have a P0011 story? Share it.

Your experience helps other drivers fix this faster and skip the wrong repair. Takes 2 minutes.

🔧 Share my P0011 fix ❌ Report a wrong diagnosis 📖 Browse Repair Guides
🔧
Usta
● Online