✅ Fixed
VANOS solenoid screen clogged — cleaned with brake cleaner. Also found small boost leak at charge pipe. Both fixed. P0171 resolved.
BMW 1 Series 2015 N13 engine P0171
On This Page:
🔍 Symptoms
⚙️ Causes
🔧 All Repairs
⚠️ Avoid These
🧾 Driver Reports
🔗 Similar Faults
📖 Repair Guides
⚡ Quick Summary
Severity Level
High
Safe to Drive?
⚠️ Drive with Caution
Safety Impact
Can become a safety issue if left unresolved
Urgency Level
🟠 Fix Soon
Lean code P0171 on BMW 116i. N13 engine. Rough idle. This fault code is stored when the engine control unit detects a specific fault condition. Common causes include sensor failures, wiring faults, and component wear. Always read additional fault codes before replacing parts — multiple codes together provide a clearer diagnosis. Clear the code after repair and test drive to confirm the fault does not return.
🔍 Symptoms
📍 BMW 1 Series
⚠️ P0171 fault code
⚙️ Possible Causes
Fault code P0171 detected
BMW 1 Series
Possible: VANOS solenoid screen clogged — cleaned with brake cleaner. Also found small boost leak at charge pipe. Both fixed. P0171 resolved.
Onarım / Çözüm
Based on 54 driver confirmations
⚠️ Yanlış Teşhis mi?
No commonly reported misdiagnoses for this fault yet. If you have replaced a part that did not fix this BMW 1 Series 2015 problem, submit a wrong diagnosis report — it helps other drivers avoid the same costly mistake.
🧾 Driver Reports
🚗 More About This Vehicle
Explore more BMW models
📖 Related Repair Guides
Deneyiminizi paylaşarak diğer araç sahiplerine yardım edin.
Your real-world fix helps thousands of drivers worldwide. Takes 2 minutes.