⚠️ Important Notice


Your IP address and browser information will be recorded as proof of this acknowledgement. This data is retained for 12 months.

🟢 SOLVED: Hyundai Santa Fe 2013 Transmission slipping between gears — Hyundai Santa Fe 2013 | MyCarFault
🟢 SOLVED 80% 1 fix reported · 120 driver confirmations

🟢 Hyundai Santa Fe 2013 Transmission slipping between gears

Hyundai Santa Fe 2013
Safe to Drive?
⚠️ Drive with Caution
Urgency Level
🟡 Monitor Closely

Hyundai Santa Fe 2013 automatic transmission slipping when accelerating. RPM rises but car does not accelerate. Worse when warm. 108404 km. This fault code is stored when the engine control unit detects a specific fault condition. Common causes include sensor failures, wiring faults, and component wear. Always read additional fault codes before replacing parts — multiple codes together provide a clearer diagnosis. Clear the code after repair and test drive to confirm the fault does not return.

🔍 Symptoms

📍 Hyundai Santa Fe

⚙️ Possible Causes

Hyundai Santa Fe Possible: Transmission fluid dark brown and smelled burnt. Full fluid and filter service performed. Slipping resolved completely. Now on 30k mile fluid change schedule.

Onarım / Çözüm

Based on 120 driver confirmations

Transmission fluid dark brown and smelled burnt. Full fluid and filter service performed. Slipping resolved completely. Now on 30k mile fluid change schedule. 0%
0 worked · 0 did not · ⚪ Unverified

🧾 Driver Reports

✅ Fixed Transmission fluid dark brown and smelled burnt. Full fluid and filter service performed. Slipping resolved completely. Now on 30k mile fluid change schedule.
Bu yardımcı oldu mu? 0 votes

Deneyiminizi paylaşarak diğer araç sahiplerine yardım edin.

Your real-world fix helps thousands of drivers worldwide. Takes 2 minutes.

🔧
Usta
● Online