⚠️ Important Notice


Your IP address and browser information will be recorded as proof of this acknowledgement. This data is retained for 12 months.

🟢 SOLVED: Audi A4 2014 2.0 TFSI oil consumption piston rings — Audi A4 2014 | MyCarFault
🟢 SOLVED 80% 1 fix reported · 112 driver confirmations

🟢 Audi A4 2014 2.0 TFSI oil consumption piston rings

Audi A4 2014
Safe to Drive?
🚫 Do NOT Drive
Urgency Level
🔴 Fix Immediately

Using 1 quart every 800 miles. No smoke under normal driving. 95000 miles. This fault code is stored when the engine control unit detects a specific fault condition. Common causes include sensor failures, wiring faults, and component wear. Always read additional fault codes before replacing parts — multiple codes together provide a clearer diagnosis. Clear the code after repair and test drive to confirm the fault does not return.

🔍 Symptoms

📍 Audi A4

⚙️ Possible Causes

Audi A4 Possible: Applied for Audi settlement — VIN qualified for extended coverage to 7 years/100k miles. Dealer replaced piston rings and cylinder head at no charge.

Onarım / Çözüm

Based on 112 driver confirmations

Applied for Audi settlement — VIN qualified for extended coverage to 7 years/100k miles. Dealer replaced piston rings and cylinder head at no charge. 0%
0 worked · 0 did not · ⚪ Unverified

🧾 Driver Reports

✅ Fixed Applied for Audi settlement — VIN qualified for extended coverage to 7 years/100k miles. Dealer replaced piston rings and cylinder head at no charge.
Bu yardımcı oldu mu? 0 votes

📖 Related Repair Guides

Deneyiminizi paylaşarak diğer araç sahiplerine yardım edin.

Your real-world fix helps thousands of drivers worldwide. Takes 2 minutes.

🔧
Usta
● Online