⚠️ Important Notice


Your IP address and browser information will be recorded as proof of this acknowledgement. This data is retained for 12 months.

🟢 SOLVED: Chery Tiggo 7 Pro rear suspension bush wear — clunking — Chery Tiggo 7 Pro 2020 | MyCarFault
🟢 SOLVED 0% 19 fixes reported · 28 driver confirmations

🟢 Chery Tiggo 7 Pro rear suspension bush wear — clunking

Chery Tiggo 7 Pro 2020
On This Page: 🔧 All Repairs ⚠️ Avoid These 🔗 Similar Faults 📖 Repair Guides
⚡ Quick Summary
Severity Level
Low
Safe to Drive?
✅ Safe to Drive
Safety Impact
No direct safety impact reported by owners
Urgency Level
🟢 Low Priority

Clunking or knocking from the rear suspension over bumps and when reversing. The rear trailing arm bushes wear prematurely on vehicles used on poor road surfaces. Replacement bushes are available from Chery parts suppliers. The repair requires a wheel alignment check after fitting. Polyurethane replacement bushes provide better durability than OEM rubber items.

Onarım / Çözüm

No confirmed fixes yet. Share yours below.

⚠️ Yanlış Teşhis mi?

No commonly reported misdiagnoses for this fault yet. If you have replaced a part that did not fix this Chery Tiggo 7 Pro 2020 problem, submit a wrong diagnosis report — it helps other drivers avoid the same costly mistake.

🚗 More About This Vehicle

📋 All Chery Tiggo 7 Pro fault reports → 🚘 All Chery fault reports → 🔧 Browse all fault reports →
Explore more Chery models
Chery Tiggo 8 Pro 20 Chery Omoda 5 10 Chery Tiggo 4 Pro 2

📖 Related Repair Guides

Deneyiminizi paylaşarak diğer araç sahiplerine yardım edin.

Your real-world fix helps thousands of drivers worldwide. Takes 2 minutes.

🔧
Usta
● Online